asked in Technical problem by
I put mineral oil as coolant and experienced oil leaks from all rotary fittings. And all the O-rings were swollen with mineral oil and could no longer be used. In this case, can it be used by replacing only the O-ring?

9 Answers

answered by (117k points)
Dear Won,

If the Oring is in the thread,  you can replace the O-ring with BP-WTP-O10-BK.

https://shop.bitspower.com/index.php?route=product/product&path=59_128_374&product_id=404
But if the O-ring is inside the rotary, it could not be opened and replaced the O-ring.

Also, we advise you to only use our coolant BPTA-CMCD500 as the coolant.
https://shop.bitspower.com/index.php?route=product/product&product_id=7443&search=500m
asked Jun 9, 2022 in Technical problem by (120 points) One more thing.
answered by (140 points)

ミネラルオイルは、ほとんどの冷却システムで使用される標準的なOリングとは互換性がなく、膨張や劣化を引き起こします。Oリングを交換するだけでは、長期的な解決にはならない可能性があります。ミネラルオイルに耐性のある素材、例えば**Viton(FKM)やNitrile(NBR)**で作られたOリングを使用する必要があります。また、オイルによって回転継手に損傷や摩耗がないかも確認してください。計算器 問題が続く場合は、システムの材料に適した冷却液に変更することを検討してください。

answered by (220 points)

Swollen O-rings usually mean the material isn't resistant to the coolant you're using. Mineral oil can degrade standard rubber quickly. Try switching to silicone or Viton O-rings and test them before full use. Also, if you're into FC Mobile content, click here for all the latest FC Mobile Events, guides, and updates!

answered by (220 points)

It sounds like the mineral oil caused a chemical reaction with the O-rings, which is unfortunately common with certain rubber types. You might be able to fix it by replacing the O-rings with ones made of a more compatible material like Viton. Also if you're documenting your setup visually and want clearer photos, you can mejorar imagen online using the Airbrush Image Enhancer for better detail.

answered by (140 points)

Yes, in most cases, you can replace just the O-rings if the fittings themselves are not damaged or degraded. However, it’s critical to choose O-rings that are compatible with mineral oil, such as ones made from Viton (FKM) or nitrile rubber (NBR). Standard silicone or EPDM O-rings will swell and fail with mineral oils. Be sure bubble tea calories to clean the fittings thoroughly before installing the new O-rings to avoid residual oil damage.

answered by (140 points)

Yes, you can probably get away with just replacing the O-rings, as long as the rest of the fitting is in good shape. But make sure the new O-rings are made from a material that works well with mineral oil—the ones when is national boba day 2025 that come by default usually aren’t. Look for mineral oil-compatible O-rings and give everything a good clean before reassembling.

answered by (140 points)

While replacing the O-rings might work short term, you should check your entire cooling loop carefully. Mineral oil can leave residue and might degrade plastics, seals, or tubing over time. If all the fittings leaked and the O-rings swelled, it’s a sign they weren’t compatible with mineral oil to begin with. Consider bubble tea map whether using a non-conductive coolant specifically designed for PC loops might be safer in the long run.

answered by (140 points)

Before downloading that Traffic Rider Mod APK to cool off with some virtual speed, make sure your real‑world rig can keep its “cool,” too: when switching a loop to mineral oil (just like switching a bike’s tune‑up), trade the swollen NBR O‑rings for Viton ones so the rotary fittings don’t leak all over your desk and cut short your gaming session.

answered ago by (220 points)
Mineral oil can damage standard O-rings, so replacing them with oil-resistant ones like Viton should solve the leak. Just be sure to clean everything well before reinstalling. Also, I came across [url="https://faceswaponline.ai/"] face shape [/url] on faceswaponline.ai — it's a cool AI tool that analyzes your face and gives style tips based on your shape.

 

 

 

 

 

...