Titan One 2.0 rgb fan and pump lights not working

Question

I recently built a computer using the Titan One 2.0. Everything was working great and looking wonderful. However, after building my rig, I noticed that the center fan of the rad was not lighting up, when all other RGB items were working just fine. I didn't see any connections as loose, or not connected, so I decided to take them all off (just the RGB cables for the fans and pump as they were all connected together. When I plugged them all back in, none of them lit up anymore. I have tried several different times with different orders to the cables, and nothing is working. Is there a specific order the cables are supposed to be plugged in the chain?

Answer 1

Dear Tim,

Thanks for your response.
Could you please send the photos or video to show the problem?
Please send us the receipt and serial number for this product, thank you.
The RGB cables should not connect with the pump.
Please send us the photo that shows how the cables are connected.
Thank you. Here is our email address.

shopservice@bitspower.com.tw

Answer 2

It sounds like a frustrating situation with your Titan One 2.0 setup. I've had my share of RGB issues, too, but I found that double-checking the connections and ensuring everything is properly seated often helps. Sometimes, the order of the cables can matter, so it might be worth experimenting a bit more.

Answer 3

When dealing with RGB issues like on the Titan One 2.0, the key is making sure the daisy-chain order and headers match properly, since even one misconnection can stop the whole chain from lighting. Double-check that you’re plugging into the right RGB header type (ARGB vs RGB) and use the controller if included. For a break from troubleshooting, you might find inspiration in https://radoscpodroze.com/, a travel blog full of guides and tips that can take your mind off tech frustrations.